Outer length · Outer width · Outer height
Mistake: Changing units and assuming the entered numbers were converted.
Fix: Numbers stay unchanged. Check the new unit and enter the intended measurement, or select an example for that system.
Calculators · Free
Contract dimensional-weight worksheet
Compare package mass with volume-based weight before carrier rounding.
01Enter your values
Runs in your browserRuns offline in your browser. Once the page and required files have loaded, processing needs no internet.
02Contract dimensional-weight worksheet
Runs in your browser
How it works
Compare package mass with volume-based weight before carrier rounding.
V=LWH; mᵥ=V/divisor; comparison=max(m,mᵥ); total=n×comparison
Runs in your browser
Discovery source
Your data stays yours
Inputs are processed on this page and are never sent to a server.
About this tool
Use tool ↑Compare package mass with volume-based weight before carrier rounding.
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass. Use the larger value per package and multiply by the identical package count.
How to use it
- Enter your values
Outer length · Outer width · Outer height · Actual package mass · Contract volume divisor · Identical packages
- Calculate / generate
Compare package mass with volume-based weight before carrier rounding.
- Result
Unrounded comparison weight per package: 4.8 kg Total comparison weight: 9.6 kg Dimensional weight: 4.8 kg
Calculation method
- Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
- Use the larger value per package and multiply by the identical package count.
V=LWH; mᵥ=V/divisor; comparison=max(m,mᵥ); total=n×comparison
Contract dimensional-weight worksheet
- Outer length
- 40 cm
- Outer width
- 30 cm
- Outer height
- 20 cm
- Actual package mass
- 3 kg
- Contract volume divisor
- 5000 cm³/kg
- Identical packages
- 2
Result
Unrounded comparison weight per package: 4.8 kg Total comparison weight: 9.6 kg Dimensional weight: 4.8 kg
Frequently asked questions
Limits and key assumptions
Enter your contract divisor in the displayed units, not a universal carrier rate. No carrier-specific dimension rounding, weight rounding, minimum charge, surcharges, freight quote or mixed-package optimization is included.
Where does my data go?
Calculations run on your device. Form inputs are not sent to a server.
Terms and definitions
Enter your values
- Measurement system
The initial choice follows your browser region. Your choice is remembered on this device. Gallons are US gallons. Switching units keeps your numbers unchanged and interprets them in the new unit.
Numbers stay unchanged. Check the new unit and enter the intended measurement, or select an example for that system.
- Outer length
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Enter a numerical value for this quantity. Use the unit shown beside this field. cm / in
Minimum: 0.001 · Maximum: 1000000 cm
- Outer width
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Enter a numerical value for this quantity. Use the unit shown beside this field. cm / in
Minimum: 0.001 · Maximum: 1000000 cm
- Outer height
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Enter a numerical value for this quantity. Use the unit shown beside this field. cm / in
Minimum: 0.001 · Maximum: 1000000 cm
- Actual package mass
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Enter a numerical value for this quantity. Use the unit shown beside this field. kg / lb
Minimum: 0.000001 · Maximum: 1000000000 kg
- Contract volume divisor
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Enter a numerical value for this quantity. Use the unit shown beside this field. cm³/kg / in³/lb
Minimum: 0.000001 · Maximum: 1000000000000 cm³/kg
- Identical packages
Use the larger value per package and multiply by the identical package count.
Enter a whole number; fractional counts are not valid.
Minimum: 1 · Maximum: 1000000
Result
- Result
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass. Use the larger value per package and multiply by the identical package count.
Calculated from your entries using the method below.
- Unrounded comparison weight per package
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Calculated from your entries using the method below.
- Total comparison weight
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass. Use the larger value per package and multiply by the identical package count.
Calculated from your entries using the method below.
- Dimensional weight
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass. Use the larger value per package and multiply by the identical package count.
Calculated from your entries using the method below.
- Value
Use the larger value per package and multiply by the identical package count.
Calculated from your entries using the method below.
- Unit
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass. Use the larger value per package and multiply by the identical package count.
Calculated from your entries using the method below.
- Package volume
Multiply external length, width and height, divide by your contract divisor, then compare with actual package mass.
Calculated from your entries using the method below.
Common mistakes and quick fixes
Limits and key assumptions
Mistake: Treating a result as valid outside the described scope.
Fix: Enter your contract divisor in the displayed units, not a universal carrier rate. No carrier-specific dimension rounding, weight rounding, minimum charge, surcharges, freight quote or mixed-package optimization is included.
Limits and key assumptions
- Enter your contract divisor in the displayed units, not a universal carrier rate. No carrier-specific dimension rounding, weight rounding, minimum charge, surcharges, freight quote or mixed-package optimization is included.
- Displayed results may be rounded; rounding does not add measurement precision.